Category:
- Hand-soldered, individually insulated XLR connectors prevent short circuits
- 100% OFC wiring increases conductivity and resists corrosion for strong transmission
- Wire-mesh strain relief prevents excessive flexing near the connectors
- Heavy-duty stage box protects internal components to ensure reliable operation
INV#14141
- Clarinet swab absorbs residual moisture to prevent key-pad degradation
- Cork grease extends cork life and helps make an airtight seal for the joints and mouthpiece
- Duster brush removes debris from between key rods and other hard-to-reach places
- Mouthpiece brush cleans and dries the mouthpiece to prevent blockage
INV#12791
- Expands within a speaker's mounting socket to fill gaps and eliminate tilt and wobble
- Simply slides onto a speaker pole and locks to it using the tightening knob
- Comfortable hand grip for ease of operation
INV#12055
- Sturdy hardshell case delivers secure, stable protection for an ES-335-style electric guitar
- Molded interior provides proper support for the body and neck
- Rigid wood case and weather-resistant PVC leather protects a guitar from damage and moisture
- Plush interior lining provides a soft cushion that safeguards the guitar's finish
INV#10114
- Information card helps keep track of instruments
- Weather-resistant transparent sleeve protects the information card from damage
- Attachment strap ensures the information card stays with the instrument case
INV#12802
- For use with a variety of stringed instruments including violin, viola, cello, and bass
- Enables bow hair to grip strings properly for maximum tone control
- Easy to apply by simply passing the bow across the surface a few times
- Compact tin can be stored in an instrument case for convenient access
INV#12789
- Protects and transports a concert ukulele (27.5" x 11")
- Weather-resistant exterior and thick padding guard against moisture and impact damage
- Adjustable backpack straps enable comfortable hands-free carrying
- Accessories compartment keeps picks, capos, tuners, and strings with your ukulele
INV#13027
- Adds support for four mic accessories to a mic stand—no need for additional stands
- Four 5/8"-27 threaded stems accept a wide range of standard mic accessories
- Clamp firmly grips mic stands measuring 0.85"–1.2" (22–30 mm) in diameter
- Tightening washers secure mic accessories from the bottom for ease of positioning
INV#12647
- Extra protection against falls for wall and ceiling-mounted speakers, lights, and flyable stage equipment
- 28" cable feeds through and around gear, trusses, and brackets
- Braided steel cable securely holds up to 60 lb
- Looped ends and an included carabiner deliver efficient connection and removal
INV#14865
- Sturdy hardshell case delivers secure, stable protection for a single-cutaway solid-body electric guitar
- Molded interior provides proper support for the body and neck with an arched top for reinforced strength
- Rigid wood case and weather-resistant PVC leather protects a guitar from damage and moisture
- Plush interior lining provides a soft cushion that safeguards the guitar's finish
INV#81459
- Durable construction ensures dependable performance
- 6 lb 10" low-profile base delivers unobtrusive stability while maintaining portability
- Rubber feet increase grip to prevent skids and keep gear safely in place
- Upper shaft can be used vertically or tilted up to 40° to replace the function of a boom
INV#12570
- Enables 180° of sound direction with the use of steerable suspension cables
- Adjustable tie point provides a wide range of tilt options
- Steel construction delivers stability for precise, reliable speaker placement
- Includes lag screws for secure installation
INV#14040
- Enables connections between cameras and related accessories
- Adaptable base mounts to hot shoes, tripods, and lighting stands
- Top mounts a wide range of devices including lightweight cameras, lights, and flashes
- Ball joint pans and tilts for precise placement of cameras and accessories
- Single tightening knob for quick pan and tilt adjustments
INV#14722
- Maintains the proper function and playability of brass instruments
- Keeps tuning-slide surfaces smooth but not slippery and prevents corrosion for mobility
- Twist-tube dispenser for ease of application
INV#12766
- Unobtrusively stays inside the ukulele whether the ukulele is on a stand or in a case
- Never touches the instrument body or neck and will not mar the finish
- Maintains consistent humidity to preserve the instrument's looks, longevity, and sound
- Held between the strings to ensure safety and universal fit for all ukuleles
INV#13431
- Maintains the proper function and playability of trombones
- Reduces friction and protects surfaces for smooth, noiseless slide action
- Small bottle can be stored in an instrument case for convenient access
- Dripper nozzle for ease of application
INV#12768
- Slide oil reduces friction and protects surfaces for smooth, noiseless slide action
- Lacquer-polishing cloth removes hand oils and preserves the glossy finish
- 42" trombone snake removes residue from inside the tubing to maintain proper airflow
- Mouthpiece brush cleans and dries mouthpieces to prevent blockage
INV#12796
- Compact stand for short-height miking and unobtrusive use on a desktop or podium
- 2 lb 6" base and straight 4" shaft deliver ease of assembly and straightforward operation
- Weighted base and nonslip rubber feet provide stability and vibration dampening
INV#12586
- Synthetic cloth absorbs moisture inside the instrument to prevent key-pad degradation
- Weighted string drops through a clarinet enabling the user to pull the cloth through
INV#12771
- Hand-soldered, individually insulated XLR connectors prevent short circuits
- 100% OFC wiring increases conductivity and resists corrosion for strong transmission
- Wire-mesh strain relief prevents excessive flexing near the connectors
- Heavy-duty stage box protects internal components to ensure reliable operation
INV#14147
- All-wood construction produces musical percussion tones
- Built-in snare wire delivers crisp snare slaps
- Nonslip rubber feet reduce floor vibrations and keep the cajon from sliding on the floor
- Removable foam pad on top of the cajon provides comfortable seating
INV#12745
- Hand-soldered, individually insulated XLR connectors prevent short circuits
- 100% OFC wiring increases conductivity and resists corrosion for strong transmission
- Wire-mesh strain relief prevents excessive flexing near the connectors
- Heavy-duty stage box protects internal components to ensure reliable operation
INV#14142
- Flat right-angle connectors save valuable space on pedalboards
- Durable PVC jacket stands up to frequent use
- High-quality materials and sturdy construction ensure reliable performance
INV#14489
- Provides convenient storage for studio and stage accessories such as cables, connectors, tools, and other supplies
- Smooth, sturdy drawer slides ensure reliable daily operation
- Solid steel construction
- Locks prevent theft and tampering
- Black powder coat finish
- Available in 1U, 2U, 3U, and 4U configurations, in both shallow, and standard depths
INV#14409
- Hand-soldered, individually insulated XLR connectors prevent short circuits
- 100% OFC wiring increases conductivity and resists corrosion for strong transmission
- Wire-mesh strain relief prevents excessive flexing near the connectors
- Heavy-duty stage box protects internal components to ensure reliable operation
INV#14146
- Hybrid gig bag offers the protection of a hardshell case, with the light weight of a gig bag
- Weather-resistant, rugged exterior protects your guitar from moisture and scratches
- Plush interior protects your instrument's finish
- Backpack-style straps and padded handle makes transportation easy
- Upper and lower pockets allow for plenty of storage
INV#14584
- Clutch release is positioned high on the stand for efficient height and length adjustments
- Nonslip arm sleeves adjust to keyboard width to increase stability and prevent scratches
- Heavy-duty square tubing for dependable keyboard support
- Rubber feet prevent skids and vibrations to keep keyboards safely in place
INV#12751
- Converts a mic stand to a stand for a small speaker weighing up to 15 lb
- 5/8"-27 threaded mounting socket is compatible with any standard mic stand
- Provides a pole mount that securely holds a speaker with a 1 3/8" mounting socket
INV#13415
- Extends from our WS7500RB Workstation to form an ergonomic wrap-around desktop
- Attaches to either side of the desk to adapt to various spaces and applications
- Increases the desktop surface area of your workstation
INV#12505
- 3/4" Perforated open-cell foam cubes are easily removed to create a tight, custom fit to hold, and protect your gear (no cutting required)
- Great for protecting microphones, pedals, interfaces, small mixers, cables, headphones, and other accessories
- Fits standard size 3U rack drawer
INV#14401
- Absorbent cloth provides plenty of surface area for wiping down an instrument
- Folds for convenient storage in an instrument case
INV#12801
- Constructed from durable 2" nylon for reliable guitar support
- Reinforced two-ply leather ends provide strong, nonabrasive connection to the guitar
- Heavy-duty metal buckle holds adjustments firmly in place
- Length adjusts 36"–64" to hold the instrument in optimal playing position
INV#14195
- Holds multiple production accessories on a single stand
- Two lower arms, one upper arm, and a boom-arm holder for mounting cameras, lights, mics, tablets, a boom arm, and other devices
- Clamps to desktops, tabletops, or other worksurfaces up to 4" thick
- Positionable mounting stems on swiveling arms provide a broad range of gear placement
- Includes five cable clips for managing wires, cords, and cables
- Includes three ball joint adapters for 360 degrees of pan and 90 degrees of tilt
- Includes 3/8" and 5/8" adapters for mounting a variety of audio/visual equipment
INV#14752
- Hybrid gig bag offers the protection of a hardshell case, with the light weight of a gig bag
- Weather-resistant, rugged exterior protects your guitar from moisture and scratches
- Plush interior protects your instrument's finish
- Backpack-style straps and padded handle makes transportation easy
- Upper and lower pockets allow for plenty of storage
INV#14582
- Ultra-durable nylon exterior with interior padding protects all hardware
- Handcart-style pull handle with dual, linkable lift handles
- Wide-mouth opening with linked zippers for efficient setup and teardown of bulky hardware
- Exterior zip compartments can accommodate standard round drum thrones, sticks, keys, and more
INV#14185
- Cleans and dries woodwind-instrument mouthpieces to prevent staining
- Removes debris and moisture buildup to improve playability
- Stiff bristles and tapered shape efficiently clean mouthpieces after playing
INV#12770
- Synthetic cloth absorbs moisture inside the instrument to prevent key-pad degradation
- Weighted string drops through a sax enabling the user to pull the cloth through
INV#12773
- Covers empty rack slots to protect equipment from debris and tampering
- Vents promote airflow to help keep heat-sensitive devices cool
- Standard 4U size fits perfectly between components
- Solid-steel construction delivers strength and stability to safeguard rack-mount gear
INV#14229
- Cleans and dries brass-instrument mouthpieces to prevent staining
- Removes debris and moisture buildup to prevent blockage and maintain playability
INV#12769
- Microfiber cloth absorbs moisture inside the instrument to prevent key-pad degradation
- Weighted string drops through a clarinet enabling the user to pull the cloth through
- Zigzag edges on the cloth increase surface area to catch more moisture and debris
- String weight is encased in the string material to prevent scratches to the instrument
INV#12781
- Clamp adjusts to fit any truss tubing 1.5"–2" in diameter
- Top-mounted hook retains cables for a secure, organized setup
- Heavy-duty construction for stable, reliable mounting of fixtures weighing up to 200 lb
- Padding on the clamp protects truss from scratches and boosts grip to prevent rotation
INV#12565
- Stretches to provide a snug fit for a wide range of keyboards with 61 to 76 keys
- Built-in bag with cinch-cord closure and cord lock for compact storage and transportation
- Lint-free, weather-resistant spandex protects the keyboard from dust, debris, and moisture
- Cinch cord with cord lock tightens the cover to securely hold it on the keyboard
INV#14170
- Microfiber cloth absorbs moisture inside the instrument to prevent key-pad degradation
- Weighted string drops through a sax enabling the user to pull the cloth through
- Zigzag edges on the cloth increase surface area to catch more moisture and debris.
- String weight is encased in the string material to prevent scratches to the instrument
INV#12782
- Sturdy hardshell case delivers secure, stable protection for a concert ukulele
- Rigid wood case and weather-resistant vinyl protects the ukulele from damage and moisture
- Plush interior lining provides a soft cushion that preserves the ukulele's finish
- Accessories compartment keeps picks, capos, tuners, and strings with your ukulele
INV#10112
- Constructed from durable 2" nylon for reliable guitar support
- Reinforced two-ply leather ends provide strong, nonabrasive connection to the guitar
- Heavy-duty metal buckle holds adjustments firmly in place
- Length adjusts 36"–64" to hold the instrument in optimal playing position
INV#14197
- Constructed from durable 2" nylon for reliable guitar support
- Reinforced two-ply leather ends provide strong, nonabrasive connection to the guitar
- Heavy-duty metal buckle holds adjustments firmly in place
- Length adjusts 36"–64" to hold the instrument in optimal playing position
INV#14194
- Sturdy hardshell case delivers secure, stable protection for a double-cutaway solid-body electric guitar
- Molded interior provides proper support for the body and neck with an arched top for reinforced strength
- Rigid wood case and weather-resistant PVC leather protects a guitar from damage and moisture
- Plush interior lining provides a soft cushion that safeguards the guitar's finish
INV#60528
- Covers empty rack slots to protect equipment from debris and tampering
- Vents promote airflow to help keep heat-sensitive devices cool
- Standard 3U size fits perfectly between components
- Solid-steel construction delivers strength and stability to safeguard rack-mount gear
INV#14231
- Mounts up to two percussion instruments on one bracket
- Clamps to hi-hat and cymbal stands, mic stands, and other tubing up to 30mm in diameter
- Eyebolts accept a variety of percussion rods up to 11mm in diameter
- Securely holds instruments such as cowbells, tambourines, and woodblocks in playing position
- Tension knobs firmly lock the rods in place for worry free performance
INV#14850
- Supplies beginning singers with all the gear needed to mic vocals through a PA system
- Includes (1) dynamic mic, (1) 13' mic cable, (1) mic clip, (1) tripod mic stand with boom, and (1) zippered mic pouch
- Stand height adjusts 26"–42" for comfortable use while sitting or standing
- Tightening knob secures 19.5" boom angle adjustments for reliable mic placement
INV#13560
