Category:


- Heavy-duty, lightweight leg housing for dependable performance and ease of transportation
- Nonslip rubber feet prevent skids and increase stability to keep mics safe
- Burly clutch adjusts the height 32"–61.5" for precise, reliable mic placement
INV#10699

- Compact and lightweight to complement the portability of mobile PA rigs
- Folds down for efficient storage and transportation
- Height adjusts 27"–46" to adapt to a wide range of venues and applications
- Height settings are reinforced with a locking pin to ensure reliable speaker support
INV#14257

- Clamp adjusts to fit mic stand shafts and drum hardware 0.375"–1" in diameter
- Cup holder adjusts to fit cups and containers 3"–3.25" in diameter
INV#13402

- Double-braced frame and heavy-duty square tubing for dependable keyboard support
- Efficient pull knob releases clutch and springs back to lock in height and width adjustments
- Nonslip arm sleeves adjust to keyboard width to increase stability and prevent scratches
- Bolted construction provides durability for reliable performance
INV#13528

- Mounts to the top of a subwoofer and holds a PA speaker weighing up to 160 lb
- Elevates a PA 42" above a subwoofer—no need for a separate floor stand
- Steel construction delivers stability for precise, reliable speaker placement
- 1 3/8" speaker pole mounts a wide range of speakers
INV#12653

- Flexible 6" shaft bends into position and stays put for efficient mic placement
- Pinch-point-free construction protects hands and cables for ease of adjustment
- 5/8"-27 threading on both ends mounts to standard mic stands and mic clips
- Holds up to 2.5 lb to deliver stable support for a wide range of mics
INV#10673

- Heavy-duty nut and bolt support 80 lb and swivel 30° left and 30° right
- 1 3/8" speaker pole mounts a wide range of speakers
- Adjustable tilt angle enables speakers to point either straight ahead or 30à ° down
- Fully upright, the bracket accommodates speaker cabinets up to 22" deep
- Sold in pairs
INV#11715

- Slight flexibility provides a secure hold for a variety of mic diameters
- Smooth interior for ease of sliding a microphone in or out
- 5/8"-27 threading mounts to a wide range of mic stands and booms
INV#12495

- 19"–32" telescoping boom rotates, swivels, and slides lengthwise for precise mic placement
- Heavy-duty washer, nonslip pads, and a tightening knob ensure secure angle adjustments
- Included cable clip prevents drooping wires for an organized presentation
- Tightening washer secures mic clips from the bottom for a safe, dependable hold
INV#12567

- 4" screen reduces undesirable vocal pops and hisses
- Improves the sound quality of vocal recordings
- Protects mic from moisture produced by singing
- Base quickly and securely clips to a mic stand or boom
INV#12492

- Mounts cameras or small audio recorders to standard mic stands—no need for a tripod
- Ball head enables independent 360° pan and 180° tilt to facilitate precise positioning
- 5/8"-27 female and 1/4" male threading mounts to a wide range of mic stands and cameras
INV#12037

- Covers empty rack slots to protect equipment from debris and tampering
- Standard 1U size fits perfectly between components
- Solid-steel construction delivers strength and stability to safeguard rack-mount gear
- Durable powder-coat finish resists wear to maintain a professional appearance
INV#14234

- 5/8"-27 threaded socket mounts to standard mic stands and mic-mounting accessories
- Platform delivers stable support of small monitors and other devices
- Rubber padding enhances grip to prevent equipment from slipping
- Versatile platform can hold a variety of gear to adapt to a wide range of applications
INV#13509

- Flexible articulating broadcast-style mic boom moves quietly to maintain production quality
- Mounts standard 5/8"-27 mic clips and shock mounts and supports mics weighing up to 3.5 lb
- 10' XLR cable pre-installed in the tubing provides a clean look and easy cable management
- Includes a clamp for quick set up and a screw-down flange mount for installation
INV#12550

- Improves holding comfort and playing position for a violin or viola
- Foam construction provides a firm cushion that reduces hand and shoulder fatigue
INV#13078

- Padding on the platform increases grip to keep the speaker safely in place
- Height adjusts 36.5"–54" for precise speaker placement
- Height settings are reinforced with a locking pin to ensure reliable speaker support
- 18" base provides a sturdy foundation for dependable speaker stability
INV#10638

- Keyboard stand and bench for comfortably playing a keyboard while sitting or standing
- Bolted stand construction provides durability for reliable performance
- Stand height adjusts to a comfortable level for playing while sitting or standing
- Stand folds down for efficient storage and transportation
INV#11659

- Folds down compactly for ease of storage and transportation
- Includes a protective carry bag with a strap for comfortable transportation
- Displays three sheets side by side to reduce page turns
- Bookplate angle adjusts for clear, easy viewing
INV#12594

- Gold-plated terminals resist corrosion to protect signal integrity
- Textured grip makes it quick and easy to attach and detach
INV#13055

- 6" screen reduces undesirable vocal pops and hisses
- Improves the sound quality of vocal recordings
- Protects mic from moisture produced by singing
- Base quickly and securely clips to a mic stand or boom
INV#12493

- 32 bells (2.5 octaves) provides the full traditional range of the glockenspiel
- Bells mount quickly to the stand for efficient set up and teardown
- Stand adjusts in height from 25" to 38" to adapt to the needs of the player
- Nonslip rubber feet prevent accidental movement of the base
INV#13082

- Speaker pole and adapter can fit speakers with either 1 3/8" or 1 1/2" mounting sockets
- Height adjusts to adapt to a wide range of venues and applications
- Height settings are reinforced with a locking pin to ensure reliable speaker support
- Wide base with nonslip rubber feet provides stability for balanced speaker mounting
INV#10649

- Adds support for an additional keyboard to a keyboard stand
- Can be added to a two-tier stand to create a three-tier stand
- Includes end caps to seal the stand tubing for a clean look when the second tier is removed
- Tilt angle adjusts and locks in place for comfortable, reliable keyboard positioning
INV#11982

- Provides a sturdy platform for a laptop, controller, or other electronic device
- Ventilation slots enable air circulation to keep devices at a safe operating temperature
- Removable retainer brackets adjust to fit the width of the device for a secure hold
- 5/8"-27 threaded socket mounts to standard mic stands
INV#10771

- Two lamp heads each contain two high-intensity LEDs to clearly illuminate sheet music
- Two flexible goosenecks enable precise light positioning
- Each lamp head independently switches between bright light, low light, or off modes to adapt to a variety of settings
- Clip securely grips music stands and other surfaces for convenient, reliable placement
INV#14053

- Improves holding comfort and playing position for a violin or viola
- Foam construction provides a firm cushion that reduces hand and shoulder fatigue
INV#13080

- Steel-wire A-frame construction provides stability for reliable instrument support
- Width adjusts to adapt to various sizes and styles of guitars
- Versatile stepped yoke fits any type of guitar including acoustic, electric, and bass
- Padding on the contact points protects the instrument from scratches
INV#10592

- Adds support for an additional mic accessory to a mic stand—no need for an additional floor stand
- Fits mic stands, tabletops, and amp cabinets for mic access that adapts to a wide range of applications
- Clamp adjusts to grip a variety of widths and its nylon screw tip prevents scratches
- 5/8"-27 threading mounts all standard mic clips and accessories
INV#12021

- Clamp fits large-diaphragm condenser mics 42–48 mm in diameter
- Cloth-lined clamp interior protects mic from scratches
- Heavy-duty steel mount for stable, dependable mic support
- 5/8"-27 threading mounts to a wide range of mic stands and booms
INV#12541

- Contoured, lightweight, adjustable headband enables optimal positioning
- Over-ear padded earcups provide long-lasting comfort
- Detailed, accurate sound for all music genres
- High-quality audio for silent practice sessions
- 40 mm, 32 drivers produce a full soundstage
- 20 Hz-20 kHz frequency response delivers natural highs and deep bass
- Includes a 6' cable with an 1/8" male connector and a 1/4" adapter for ease of use with a wide range of devices
INV#14000

- Folds down compactly for ease of storage and transportation
- Includes a protective carry bag with a strap for comfortable transportation
- Displays three sheets side by side to reduce page turns
- Bookplate angle adjusts for clear, easy viewing
INV#12590

- 1U 500 Series blank rack panel
- Fits standard 500 Series rack units
- Robust 3mm steel construction
- Black powder coat finish
INV#14269

- Replaces a subwoofer's existing 1 3/8" mounting socket with an M20-threaded socket
- Provides wobble-free connection to the base of an M20-threaded speaker pole
- Includes hardware to ensure proper installation
INV#11714

- Lok-Tight construction is easy to assemble with the included tools
- Clutch release is positioned high on the stand for efficient height and length adjustments
- Nonslip arm sleeves adjust to keyboard width to increase stability and prevent scratches
- Heavy-duty square tubing for dependable keyboard support
INV#12761

- Compact stand for short-height miking and unobtrusive use on a desktop or podium
- 7" mini boom features locking angle adjustment for precise mic placement
- Angle-adjustment clutch features interlocking teeth to support heavy mics
- 3 lb 6" base and nonslip rubber feet deliver stability and vibration dampening
INV#12583

- Mounts 5/8"-27 threaded mic accessories on flat surfaces—no need for a floor stand
- Clamp firmly grips most desktops or stands and its nylon screw tip prevents scratches
INV#11989

- Elevates a mic to facilitate field-recording applications
- Lightweight boom enables comfortable carrying for ease of following a sound source
- Ergonomically spaced padded handgrips reduce fatigue and the upper grip adjusts in position to optimize comfort
- Three telescoping shafts adjust the length 3.1'-8.1' for use in a wide range of situations
INV#10754

- Studio quality USB condenser microphone for digital recording
- Includes USB cable, mini tripod desktop stand, mic swivel clip, and foam windscreen
- Plug & play ready
- Large diaphragm
- Wide frequency range with top end presence, balanced mid range, and full low end response
INV#14411

- Holds an amp firmly in place off the floor and out of harm's way
- Heavy-duty base with locking cross braces delivers strength for stable amp support
- Support arms and base legs fold down for ease of storage and transportation
- Support arms adjust in height to adapt to a wide range of amps and applications
INV#11653

- Holds an amp at the proper angle to direct sound toward the listener
- Tilts an amp away from the floor to reduce reflections and vibrations for improved sound
- Heavy-duty frame provides strength for dependable amp support
- Steel support arms deliver stability to hold a small amp safely in place
INV#11049

- Historically popular mic stand due to its unobtrusive profile and exceptional stability
- 7 lb 10" metal base delivers stability while maintaining portability
- Rubber feet increase grip to prevent skids and keep gear safely in places
- Heavy-duty clutch reliably adjusts height 33"–60" for use in a wide range of applications
INV#12412

- Keeps wrapped cables neat by preventing unravelling and tangling
- Hook-and-loop fastens securely yet releases easily for efficient cable storage and access
- Ties feature a slit that enables them to remain attached to cables when not in use
INV#12469

- Posi-Lok angle-adjustment clutch features interlocking teeth for exceptionally stable mic support
- Wide range of angle adjustability for precise mic placement
- Ergonomic tightening knob for efficient angle adjustments
- Adds a space-saving 7" mic boom to a mic stand—no need for an additional floor stand
INV#12651

- Height and boom position adjust for unobtrusive miking of amps and drums
- 20"-36" telescoping boom provides 320° of angle adjustment for precise mic placement
- Heavy-duty clutch adjusts height 17"-27" for use in a wide range of applications
- 22" tripod-base spread delivers a stable foundation to keep mics safely in place
INV#10755

- Portable stand safely stores multiple guitars and enables quick access
- Holds various combinations of acoustic and electric guitars to adapt to your collection
- Padding on the contact points protects guitars from scratches
- Number of guitars on the stand doesn't affect balance for safe, easy switching between instruments
INV#10587

- Padding on the platform increases grip to keep the speaker safely in place
- Height adjusts 36.5"–54" for precise speaker placement
- Height settings are reinforced with a locking pin to ensure reliable speaker support
- Heavy-duty 14" base provides a sturdy foundation for dependable speaker stability
INV#13091

- Thick cushion delivers long-lasting playing comfort
- Flip-top seat provides a convenient storage space for sheet music and accessories
- Seat lid features hinges that automatically hold it open to prevent slamming
- Solid wood base construction for stable and reliable support
INV#13532

- Yoke automatically rotates to adjust to various headstock shapes
- Padding on the yoke and bumpers protects the guitar from scratches
- Yoke folds down for ease of storage and transportation
- Height adjusts to fit a wide range of guitar styles and sizes
INV#10720

- 6" screen reduces undesirable vocal pops and hisses
- Micro-weave nylon diffuser reduces pops and hisses without disrupting vocal tone
- Base quickly and securely clamps to a mic stand or boom
- 13" gooseneck for precise positioning and proximity adjustments
INV#12510

- Thick cushion delivers long-lasting playing comfort
- Vinyl cover's hidden vents prevent cushion sagging and promote airflow to keep it cool
- Solid-wood base construction for stable and reliable support
- Elegant design complements the appearance of a piano or keyboard
INV#13531