Category:


- Supplies singers with all the gear needed to mic vocals through a PA system
- Includes (1) dynamic mic, (1) 13' mic cable, (1) mic clip, (1) tripod mic stand with boom, and (1) zippered mic pouch
- Stand height adjusts 41.5"–63" for comfortable use while sitting or standing
- Tightening knob secures 31.5" boom angle adjustments for reliable mic placement
INV#11493

- Stands can be stacked for efficient storage and transportation
- Burly metal base delivers stability while maintaining portability
- Rubber feet increase grip to prevent skids and keep gear safely in place
- Heavy-duty clutch reliably adjusts height 34"–61" for use in a wide range of applications
INV#14084

- Height and boom position adjust for unobtrusive miking of amps and drums
- 20"-36" telescoping boom provides 320° of angle adjustment for precise mic placement
- Heavy-duty clutch adjusts height 17"-27" for use in a wide range of applications
- 22" tripod-base spread delivers a stable foundation to keep mics safely in place
INV#10755

- Protective storage and transportation for most 16" mixers
- Two straps with a padded handle & included shoulder strap for comfortable lifting and carrying
- Heavy-duty, weather-resistant exterior, piped edges, and padded interior protect gear from damage
- Dual exterior pocket keeps cables, connectors, and other accessories with the mixer
INV#14566

- Rocker-Lug eliminates the need for a boom for a streamlined mic setup
- Upper shaft can be used vertically or tilted up to 40° to replace the function of a boom
- Heavy-duty, lightweight leg housing for dependable performance and ease of transportation
- Burly clutch adjusts the height 39"–63" for precise, reliable mic placement
INV#12572

- Mounts to the handles of our UTC2200 & UTC5500 utility carts to create a workstation, table, or shelf
- Sturdy platform handles 80 lb for dependable support of mixers and controllers
- Includes cable ties, slots, and ports to route cables for an organized setup
- Can mount on top of the handles or at various heights between the handles for use in a wide range of applications
INV#14172

- A-frame base provides balance and sturdiness for safe, reliable guitar support
- Flip-It® yoke automatically closes around the neck to prevent the guitar from being bumped off the stand
- Stepped lower yoke provides two zones to snugly hold acoustic or electric guitars
- Yoke latch flips down and springs up for easy placement and removal of a guitar
INV#12912

- Organizes and protects multiple rack-mount components in a single footprint
- Equipment is angled upward toward the user for ease of viewing and adjusting settings
- Includes rack screws for safe, secure mounting of gear
- Heavy-duty construction and nonslip rubber feet for stable support of delicate equipment
INV#11185

- Accommodates up to two wireless mic units for convenient, protective transportation
- Two-pull zipper opens or closes at either end or any point between for ease of access
- Removable adjustable shoulder strap for balanced, comfortable carrying
- Two separate padded compartments isolate and protect two mics and two battery packs
INV#14164

- Lok-Tight construction is easy to assemble with the included tools
- Nonslip arm sleeves adjust to keyboard width to increase stability and prevent scratches
- Heavy-duty tubing for dependable keyboard support
- Efficient pull knob releases clutch and springs back to lock in height and width adjustments
INV#12758

- Height and boom position adjust for unobtrusive miking of amps and drums
- 19" boom provides 320° of angle adjustment for precise mic placement
- Heavy-duty clutch adjusts height 17"-27" for use in a wide range of applications
- 22" tripod-base spread delivers a stable foundation to keep mics safely in place
INV#12743

- Supplies beginning singers with all the gear needed to mic vocals through a PA system
- Includes (1) dynamic mic, (1) 13' mic cable, (1) mic clip, (1) tripod mic stand with boom, and (1) zippered mic pouch
- Stand height adjusts 26"–42" for comfortable use while sitting or standing
- Tightening knob secures 19.5" boom angle adjustments for reliable mic placement
INV#13560

- Historically popular mic stand features our Quik-Release clutch for efficient adjustments
- 7 lb 10" metal base delivers stability while maintaining portability
- Rubber feet increase grip to prevent skids and keep gear safely in places
- Squeeze-to-release clutch efficiently adjusts height 34"–62" for use in a wide range of applications
INV#13409

- Height and boom position adjust for unobtrusive miking of amps and drums
- 17" boom provides 320° of angle adjustment for precise mic placement
- Height adjusts 18"–26.5" for use in a wide range of applications
- M20 threading for efficient, secure assembly and extended thread life
INV#12649

- Yoke automatically rotates to adjust to various headstock shapes
- Padding on the yokes and bumpers protects guitars from scratches
- Yokes and bumpers fold down for ease of storage and transportation
- Height adjusts to fit a wide range of guitar styles and sizes
INV#10721

- Enables four people to listen simultaneously to a single audio source over headphones
- Each listener can independently adjust their headphone volume
- Allows the listeners to hear the mix during recording or broadcast
INV#12973

- Historically popular mic stand due to its unobtrusive profile and exceptional stability
- 7 lb 10" metal base delivers stability while maintaining portability
- Rubber feet increase grip to prevent skids and keep gear safely in places
- Heavy-duty clutch reliably adjusts height 33"–60" for use in a wide range of applications
INV#10692

- Protective storage and transportation for most 12" mixers
- Two straps with a padded handle & included shoulder strap for comfortable lifting and carrying
- Heavy-duty, weather-resistant exterior, piped edges, and padded interior protect gear from damage
- Dual exterior pocket keeps cables, connectors, and other accessories with the mixer
INV#14499

- Holds up to six tripod mic stands with booms to facilitate transportation and storage
- Rugged nylon exterior, padded interior, and piped edges protect stands from damage
- Top handles and a removable adjustable shoulder strap for comfortable carrying
INV#13312

- Tripod base provides a stable foundation and prevents tipping for reliable guitar support
- Yokes and base fold down for ease of storage and transportation
- Padding on the yokes protects the guitars from scratches
- Height adjusts 19"–33" to fit a wide range of guitar styles and sizes
INV#10748

- Protects and transports a tenor ukulele
- Padded handle and backpack straps enable balanced, comfortable lifting and carrying
- Foam-lined interior protects the ukulele from impact damage while preserving the finish
- Accessories compartment keeps picks, capos, tuners, and strings with your ukulele
INV#14207

- Protects and transports a baritone ukulele
- Padded handle and backpack straps enable balanced, comfortable lifting and carrying
- Foam-lined interior protects the ukulele from impact damage while preserving the finish
- Accessories compartment keeps picks, capos, tuners, and strings with your ukulele
INV#14211

- Holds an amp at the proper angle to direct sound toward the listener
- Five tilt positions enable proper sound direction with reduced floor reflections
- Built-in threaded lug mounts a mic boom—no need for an extra mic stand
- Padding on the support arms and back rest increase grip to keep the amp safely in place
INV#11181

- Hypercardioid polar pattern reduces feedback and off-axis noise for a clear signal
- Frequency response provides vocal clarity
- Heavy-duty housing with mesh grill protects internal components for reliable performance
- Built-in pop filter suppresses vocal plosives and breath noise to improve sound quality
INV#14235

- 1500 mA adapter powers up to eight pedals-no need for multiple power supplies
- Heavy-duty output cable withstands frequent use and coiling
- Included multi-plug cable delivers power to eight pedals for tidy cable management
- Included converters adapter plugs to fit a wide range of 9 V effects including Line 6 modeling pedals
- Note: Included 9V battery connectors can be used to power pedals with a 9V battery in situations where power sources are limited. These should not be used to power vintage pedals that require a 9V battery
INV#12935

- Compact footprint with short lower shaft facilitates positioning in tight spaces
- 16" boom provides 320° of angle adjustment for precise mic placement
- Heavy-duty clutch adjusts height 8"–14" for use in a wide range of applications
- Compact U-shaped base provides stability while conserving floor space
INV#13230

- Historically popular mic stand due to its unobtrusive profile and exceptional stability
- 7 lb 10" metal base delivers stability while maintaining portability
- Rubber feet increase grip to prevent skids and keep gear safely in places
- Heavy-duty clutch reliably adjusts height 33"–60" for use in a wide range of applications
INV#12412

- Light and portable desktop platform for a laptop, controller, or other device
- Height adjusts 9.5"–14.5" to hold gear at a comfortable viewing and operating level
- Angled platform for ease of access to device settings and controls
- Padding and bumpers on the platform keep equipment safely in place
INV#13231

- Weighted, one-piece construction keeps headphones safely in place
- Small footprint and sleek shape for an organized, professional-looking workspace
- Curved upper rest maintains the contour of headbands
- Vertical arrangement holds headphones upright, preventing stress to ear cups and mics
- Lower tray stores small items such as guitar picks and earbuds
INV#14755

- Flip-It® yoke automatically closes around the neck to prevent the guitar from being bumped off the stand
- Combines balance, sturdiness, and a yoke latch to keep guitars exceptionally safe
- Yoke latch flips down and springs up for easy placement and removal of a guitar
- Tilt-back stance prevents the guitar from tipping or falling forward
INV#12514

- Weather-resistant exterior protects the mandolin from moisture
- Foam padding guards the instrument against dings and dents
- Smooth interior lining keeps the mandolin finish safe
- Two accessory compartments keep tools and supplies with the instrument
- Two-pull zipper opens and closes at either end or any point between for ease of access
- Adjustable backpack-style straps and a handle for ease of lifting and carrying
- Two bag-hanger loops at the top enable convenient hanging storage
INV#14716

- Protects and transports a concert ukulele
- Padded handle and backpack straps enable balanced, comfortable lifting and carrying
- Foam-lined interior protects the ukulele from impact damage while preserving the finish
- Accessories compartment keeps picks, capos, tuners, and strings with your ukulele
INV#14200

- Protects and transports a soprano ukulele
- Padded handle and backpack straps enable balanced, comfortable lifting and carrying
- Foam-lined interior protects the ukulele from impact damage while preserving the finish
- Accessories compartment keeps picks, capos, tuners, and strings with your ukulele
INV#14201

- Heavy-duty, lightweight leg housing for dependable performance and ease of transportation
- Nonslip rubber feet prevent skids to keep mics safely in place
- Burly clutch adjusts the height 32"–61.5" for precise, reliable mic placement
- Removable 30" boom adjusts in angle for precise mic placement
INV#10700

- Holds an amp at the proper angle to direct sound toward the listener
- Tilts an amp away from the floor to reduce reflections and vibrations for improved sound
- Heavy-duty frame provides strength for dependable amp support
- Steel support arms deliver stability to hold a small amp safely in place
INV#11049

- Compact and lightweight to complement the portability of mobile PA rigs
- Folds down for efficient storage and transportation
- Height adjusts 27"–46" to adapt to a wide range of venues and applications
- Height settings are reinforced with a locking pin to ensure reliable speaker support
INV#14257

- Compact footprint saves valuable space on your pedalboard
- High-contrast color display provides a clear view from a distance and in low light
- True bypass circuitry removes the pedal from the signal path when the pedal is turned off
- Powered by a 9 V dc adapter or power bank for ease of integration into a pedalboard
INV#13315

- Splits one input for switching between two signal paths, or combines two inputs to share one signal path
- True-bypass circuitry removes the pedal from the signal path when the pedal is off
- Heavy-duty aluminum housing protects the internal components to ensure reliable performance
- Nonslip rubber on the pedal bottom prevents skidding when using the switch
- 3-Color changing LED indicate A/B and A+B selections
INV#14077

- Our strongest A-frame base provides exceptional sturdiness for balanced guitar support
- Versatile stepped yoke fits any type of guitar including acoustic, electric, and bass
- Sturdy yoke also holds desktop mixers and combo amps
- Padding on the contact points protects gear from scratches
INV#11239

- Elevate speakers and absorb vibrations to improve sound quality
- Included wedges adjust the speaker angle for proper sound direction
- Nonabrasive surfaces protect speakers and furniture from scratches
INV#12824

- Yoke automatically rotates to adjust to various headstock shapes
- Padding on the yokes and bumpers protects guitars from scratches
- Yokes and bumpers fold down for ease of storage and transportation
- Height adjusts to fit a wide range of guitar styles and sizes
INV#10749

- Heavy-duty square tubing for dependable keyboard support
- - Pull knob releases and locks clutch for quick, easy height and width adjustments
- Nonslip arm sleeves adjust to keyboard width to increase stability and prevent scratches
- Durable powder-coat finish for a professional presentation
INV#11183

- Two flexible goosenecks enable precise light positioning
- Two lamp heads each contain four high-intensity LEDs to clearly illuminate sheet music
- Lamp color switches between red and white to adapt to various applications
- Clip securely grips music stands and other surfaces for convenient, reliable placement
INV#13886

- 3/4" Perforated open-cell foam cubes are easily removed to create a tight, custom fit to hold, and protect your gear (no cutting required)
- Great for protecting microphones, pedals, interfaces, small mixers, cables, headphones, and other accessories
- Fits standard size 2U rack drawer
INV#14399

- Hypercardioid polar pattern reduces feedback and off-axis noise for a clear signal
- On/off switch controls muting on the mic itself to prevent unwanted noise
- Frequency response provides vocal clarity
- Heavy-duty housing with mesh grill protects internal components for reliable performance
INV#14236

- Heavy-duty, lightweight leg housing for dependable performance and ease of transportation
- Nonslip rubber feet prevent skids and increase stability to keep mics safe
- Burly clutch adjusts the height 32"–61.5" for precise, reliable mic placement
INV#10699

- Protective storage and transportation for most 10" mixers
- Two straps with a padded handle & included shoulder strap for comfortable lifting and carrying
- Heavy-duty, weather-resistant exterior, piped edges, and padded interior protect gear from damage
- Dual exterior pocket keeps cables, connectors, and other accessories with the mixer
INV#14498

- 6" screen reduces undesirable vocal pops and hisses
- Improves the sound quality of vocal recordings
- Protects mic from moisture produced by singing
- Dual micro-weave diffusers reduce pops and hisses without disrupting vocal tone
INV#52746

- A-frame base provides exceptional sturdiness to reliably hold your guitar
- Folds down for efficient storage and transportation
- Width adjusts to adapt to various sizes and styles of guitars
- Versatile stepped yoke fits any type of guitar including acoustic, electric, and bass
INV#13493