Category:


- Compact stand is just the right size for short-height miking
- Low profile for unobtrusive use on a desktop or podium
- Removable shaft mounts standard mic clips and accessories
- Height adjusts 9"–13" for precise mic positioning
INV#12463

- 2.5 lb counterweight offsets the weight of mics or booms to increase mic stand balance
- Nylon-tipped set screw grips the mic boom securely without damaging the finish
- Also boosts the stability of mic stands when mounted to the main shaft or tripod legs
INV#11140

- Securely clamps to a drum rim to support a mic—no need for a mic stand
- 5/8"-27 threaded stem mounts a wide range of mic clips
- Threaded stem adjusts in distance from the drum head for precise mic placement
- Padded contact points and shock absorbers reduce vibrations for a clean mic signal
INV#12939

- Constructed from durable 2" cotton for reliable guitar support
- Reinforced two-ply leather ends provide strong, nonabrasive connection to the guitar
- Heavy-duty copper buckle holds adjustments firmly in place
- Length adjusts 38"–67" to hold the instrument in optimal playing position
INV#14188

- Constructed from durable 2" cotton for reliable guitar support
- Reinforced two-ply leather ends provide strong, nonabrasive connection to the guitar
- Heavy-duty copper buckle holds adjustments firmly in place
- Length adjusts 38"–67" to hold the instrument in optimal playing position
INV#14190

- Constructed from durable 2" cotton for reliable guitar support
- Reinforced two-ply leather ends provide strong, nonabrasive connection to the guitar
- Heavy-duty copper buckle holds adjustments firmly in place
- Length adjusts 38"–67" to hold the instrument in optimal playing position
INV#14187

- Constructed from durable 2" cotton for reliable guitar support
- Reinforced two-ply leather ends provide strong, nonabrasive connection to the guitar
- Heavy-duty copper buckle holds adjustments firmly in place
- Length adjusts 38"–67" to hold the instrument in optimal playing position
INV#14189

- Constructed from durable 2" cotton for reliable guitar support
- Reinforced two-ply leather ends provide strong, nonabrasive connection to the guitar
- Heavy-duty copper buckle holds adjustments firmly in place
- Length adjusts 38"–67" to hold the instrument in optimal playing position
INV#14186

- Flexible yoke fits a wide range of acoustic and electric guitars, ukuleles, banjos, mandolins, and other stringed instruments
- Swiveling yoke enables instruments with either symmetric or offset headstocks to hang straight
- Solid pine wood and steel construction delivers strength for reliable instrument support
- Padding on the yoke protects the instrument from scratches
INV#12035

- Folds down compactly for ease of storage and transportation
- Includes a protective carry bag with a strap for comfortable transportation
- Displays three sheets side by side to reduce page turns
- Bookplate angle adjusts for clear, easy viewing
INV#11746

- Stainless-steel jingles produce a rich, musical sound that complements a wide range of music genres and styles
- High pitch and bold character cuts through the mix
- Grooved handle reduces hand fatigue for long-lasting playing comfort
- Lightweight and compact for ease of transportation
- Robust character and rich sound enable use on stage and in the studio
INV#14471

- 19.5" boom rotates, swivels, and slides lengthwise for precise mic placement
- Heavy-duty washer, nonslip pads, and a tightening knob ensure secure angle adjustments
- Included cable clip prevents drooping wires for an organized presentation
- Tightening washer secures mic clips from the bottom for a safe, dependable hold
INV#13148

- Clamp adjusts to fit mic stand shafts and drum hardware 0.375"–1" in diameter
- Cup holder adjusts to fit cups and containers 3"–3.25" in diameter
INV#13402

- Built-in 6' cord provides plenty of length for ease of comfortable positioning on the floor
- Polarity switch reverses the pedal's up and down signals for universal compatibility
- Foot-pedal spring provides tension and strength for precise, dependable operation
- 1/4" connector works with any electronic keyboard with a 1/4" pedal-input jack
INV#13513

- Clamp adjusts to fit any truss tubing 1.5"–2" in diameter
- Top-mounted hook retains cables for a secure, organized setup
- Heavy-duty construction for stable, reliable mounting of fixtures weighing up to 200 lb
- Padding on the clamp protects truss from scratches and boosts grip to prevent rotation
INV#12565

- Turns a mic stand into a mic-and-guitar stand to conserve floor space
- Clamps to shafts up to 0.75" in diameter for compatibility with a wide range of stands
- Yoke rotates so instruments with symmetric or offset headstocks hang straight down
- Padding on the contact points protects the guitar from scratches
INV#10648

- Instrument-mode selection facilitates tuning of guitar, bass, ukulele, and violin
- Positionable high-contrast color display provides a clear view from various angles and in low light
- Tactile transducer enables use in noisy environments and with unamplified electric guitars
- Padding on the clip delivers a slip-free grip and protects the instrument finish
INV#13226

- Holds a ukulele, violin, viola, mandolin, lap steel guitar, dulcimer, or similar instrument
- Lightweight and compact to preserve the portability of the instruments it holds
- Steel-wire construction provides stability for reliable instrument support
- Padding on the contact points protects the instrument from scratches
INV#10588

- Great for playing cajons with or without wires
- Can produce a wide range of timbres from snare-like slap to soft, open brushing
- Rubber rings adjust bristle spacing for precise variation of dynamics
- Extended-length wood handles provide comfortable grip and balance
INV#13373

- Our best-selling guitar stand
- Padding on the yokes protects the guitar finish from scratches
- Shaft locks into a groove that keeps the upper yoke centered to balance the guitar
- Lower yoke swivels to adjust to various guitar-body shapes
INV#10586

- Mounts to the top of a subwoofer and holds a PA speaker weighing up to 160 lb
- Elevates a PA 42" above a subwoofer—no need for a separate floor stand
- Steel construction delivers stability for precise, reliable speaker placement
- 1 3/8" speaker pole mounts a wide range of speakers
INV#12653

- Covers empty rack slots to protect equipment from debris and tampering
- Vents promote airflow to help keep heat-sensitive devices cool
- Standard 3U size fits perfectly between components
- Solid-steel construction delivers strength and stability to safeguard rack-mount gear
INV#14231

- 3/4" Perforated open-cell foam cubes are easily removed to create a tight, custom fit to hold, and protect your gear (no cutting required)
- Great for protecting microphones, pedals, interfaces, small mixers, cables, headphones, and other accessories
- Fits standard size 1U rack drawer
INV#14398

- Covers empty rack slots to protect equipment from debris and tampering
- Standard 4U size fits perfectly between components
- Solid-steel construction delivers strength and stability to safeguard rack-mount gear
- Durable powder-coat finish resists wear to maintain a professional appearance
INV#14233

- Adds support for four mic accessories to a mic stand—no need for additional stands
- Four 5/8"-27 threaded stems accept a wide range of standard mic accessories
- Clamp firmly grips mic stands measuring 0.85"–1.2" (22–30 mm) in diameter
- Tightening washers secure mic accessories from the bottom for ease of positioning
INV#12647

- Keeps a guitar safe, accessible, and off the floor to conserve space in the studio or at home
- Solid-steel base delivers the strength to reliably support a guitar
- Padding on the yoke protects the guitar from scratches
- Durable powder-coat finish preserves the professional look of any performance space
INV#11994

- Removable gooseneck features 5/8"-27 threading to mount standard mic clips
- Gooseneck enables quiet and efficient mic placement–no need for a knob or clutch
- 2.4 lb base and nonslip rubber feet deliver stability and vibration dampening
INV#10690

- Folds down compactly for ease of storage and transportation
- Displays three sheets side by side to reduce page turns
- Bookplate angle adjusts for clear, easy viewing
- Fold-out retainers hold sheet music in place and prevent it from falling or blowing away
INV#12589

- Enables a music stand to double as a violin hanger—no need for an additional stand
- u-mount clamp adjusts to fit a wide range of mic stands and music stands
- Yoke securely supports a violin and features a hanger for a bow
- Yoke rotates to compensate for offset tuning pegs so the violin hangs straight down
INV#12095

- Adds support for four mic accessories to a mic stand—no need for additional stands
- Four 5/8"-27 threaded stems accept a wide range of standard mic accessories
- Clamp firmly grips mic stands measuring 0.4"–0.8" (11–22 mm) in diameter
- Tightening washers secure mic accessories from the bottom for ease of positioning
INV#12563

- Posi-Lok angle-adjustment clutch features interlocking teeth for exceptionally stable mic support
- Wide range of angle adjustability for precise mic placement
- Ergonomic tightening knob for efficient angle adjustments
- Compact 7" boom unobtrusively fits in tight spaces
INV#12655

- Weighted base provides a stable foundation to safely support and balance the instrument
- Bell-support post fits snugly inside most clarinets and flutes to provide a secure grip
- Nonslip rubber feet boost stability and stop skids to keep the instrument safely in place
INV#12579

- Rich, musical tone suits a wide range of music genres and styles
- High Pitch and bold character stands out in the mix on stage or in the studio
- Forged eye-bolt clamp mounts to percussion rods 8.5- 9.5 mm in diameter for ease of integration into drum kits or percussion setups
- Durable wood construction withstands hard strikes for dependable performance
INV#14573

- 5" cowbell produces a musical tone for embellishing a variety of music genres and styles
- Medium pitch and bold character cuts through the mix on stage or in the studio
- Forged eye-bolt clamp mounts to percussion rods 8.5 mm- 9.5 mm in diameter for ease of integration into drum kits or percussion setups
INV#14468

- Hangs guitars and basses by the headstock to work with any body style
- Yoke automatically closes around the neck to prevent the guitar from being bumped off the wall
- Padding on the yoke protects the guitar from scratches
- Includes mounting hardware for ease of installation
INV#14026

- 4" screen reduces undesirable vocal pops and hisses
- Improves the sound quality of vocal recordings
- Protects mic from moisture produced by singing
- Base quickly and securely clips to a mic stand or boom
INV#12492

- Phillips-head 6 mm screws securely fasten rack-mount gear to rack stands and cabinets
- 25 screws mount multiple components and replace old, mismatched, or worn-out screws
INV#14277

- Adapts M20-threaded speaker poles to connect to unthreaded 1 3/8" mounting sockets
- Removable threaded lug enables connection to any M20-threaded mounting socket
- Solid steel construction for dependable speaker support
INV#14073

- Affordable music stand that delivers reliable performance and convenient portability
- Includes a protective carry bag with a strap for comfortable transportation
- Displays three sheets side by side to reduce page turns
- Bookplate angle adjusts for clear, easy viewing
INV#12627

- Affordable music stand that delivers reliable performance and convenient portability
- Displays three sheets side by side to reduce page turns
- Bookplate angle adjusts for clear, easy viewing
- Bookplate detaches and folds down for compact storage and portability
INV#12626

- Covers empty rack slots to protect equipment from debris and tampering
- Vents promote airflow to help keep heat-sensitive devices cool
- Standard 2U size fits perfectly between components
- Solid-steel construction delivers strength and stability to safeguard rack-mount gear
INV#14227

- Covers empty rack slots to protect equipment from debris and tampering
- Standard 3U size fits perfectly between components
- Solid-steel construction delivers strength and stability to safeguard rack-mount gear
- Durable powder-coat finish resists wear to maintain a professional appearance
INV#14232

- Flexible gooseneck enables precise light positioning
- Lamp head contains two high-intensity LEDs that clearly illuminate sheet music
- Switches between bright light, low light, or off modes to adapt to a variety of settings
- Clip securely grips music stands and other surfaces for convenient, reliable placement
INV#14052

- Mounts to our DT8500 Guitar Throne for convenient guitar access that conserves floor space
- Screws into an M10-threaded socket to ensure a stable hold for your instrument
- Hangs guitars and basses by the headstock to work with any body style
- Heavy-duty construction reliably supports instruments weighing up to 12 lb
INV#12669

- Yoke faces straight or at a 45° angle for optimum guitar display and accessibility
- Flip-It® yoke automatically closes around the neck to prevent the guitar from being bumped off the wall
- Baseplate mounts directly to slatwall, eliminating the need for additional hardware
- Heavy-duty construction reliably holds a guitar weighing up to 11 lb
INV#10706

- Constructed from durable 2" nylon for reliable guitar support
- Reinforced two-ply leather ends provide strong, nonabrasive connection to the guitar
- Heavy-duty metal buckle holds adjustments firmly in place
- Length adjusts 36"–64" to hold the instrument in optimal playing position
INV#14194

- Constructed from durable 2" nylon for reliable guitar support
- Reinforced two-ply leather ends provide strong, nonabrasive connection to the guitar
- Heavy-duty metal buckle holds adjustments firmly in place
- Length adjusts 36"–64" to hold the instrument in optimal playing position
INV#14193

- Constructed from durable 2" nylon for reliable guitar support
- Reinforced two-ply leather ends provide strong, nonabrasive connection to the guitar
- Heavy-duty metal buckle holds adjustments firmly in place
- Length adjusts 36"–64" to hold the instrument in optimal playing position
INV#14191

- Constructed from durable 2" nylon for reliable guitar support
- Reinforced two-ply leather ends provide strong, nonabrasive connection to the guitar
- Heavy-duty metal buckle holds adjustments firmly in place
- Length adjusts 36"–64" to hold the instrument in optimal playing position
INV#14195

- Constructed from durable 2" nylon for reliable guitar support
- Reinforced two-ply leather ends provide strong, nonabrasive connection to the guitar
- Heavy-duty metal buckle holds adjustments firmly in place
- Length adjusts 36"–64" to hold the instrument in optimal playing position
INV#14197